Technical Parameter
Item |
Specifications |
Step Angle Accuracy |
±5% |
Resistance Accuracy |
±10% |
Inductance Accuracy |
±20% |
 Temperature Rise |
80K Max. |
Ambient Temperature |
-20℃~+50℃ |
Insulation Resistance |
100MΩMin.@ 500VDC |
Dielectric strength |
One minute@500VAC∙5mA Max. |
Shaft Radial Play |
0.06Max.@450g |
Shaft Axial Play |
0.08Max.@450g |
Â
Technical Specification
Model No. |
Polar |
Rated |
Current/ |
Resistance/ |
Inductance/ |
Holding |
# of |
Rotor |
Weight |
Length |
|
35H033HM-0406 |
Unipolar |
V |
A |
Ω |
mH |
oz-in |
kgf · cm |
6 |
g∙ cm2 |
kg |
mm |
10 |
0.4 |
25 |
20 |
15.2 |
1.1 |
14 |
0.17 |
33 |
Â
Mechanical Dimension                                 Â
Â
Pull Out Torque Curve
FAQ
Q: Is there the products tested before shipping?
A: All of our motors will be 100%QC before shipping.
Â
Q: What are the common problems faced when using stepper motors?
A: Common problems include missed steps, resonance, overheating, inadequate torque, and electrical noise interference.
Â
Q: Can I run a stepper motor at high speeds?
A: Running a stepper motor at high speeds can be challenging due to torque drop-off, rotor inertia, and other limitations. High-speed operation may require careful motor selection and optimized control parameters.
Â
Q: Are there any safety considerations when using stepper motors?
A: Safety considerations include proper electrical wiring and grounding, heat dissipation, mechanical hazards, and adhering to the guidelines for safe operation.
http://www.sitmotors.com/